Tag: SISE 300-715

  • Exam Review: Cisco SISE 300-715

    Back in late 2019, I made a decision that I was going to attempt to take the Cisco IINS 210-260 and SISAS 300-208 tests prior to the “Certpocalypse” of exams retiring in late February 2020.  My thinking was two-fold:

    1. My existing CCNA Cybersecurity Operations certification would be retitled as a “Cisco Certified CyberOps Associate.”  By passing the IINS exam I would be able to retain my CCNA status within the Security domain.

    2. The new exams being released after February 2020 would consist of a core exam and one or more specialty exams.  If I passed the SISAS test prior to its expiration, I would then only need to take one test – the SCOR – to convert that result into a CCNP level certification.

    Unfortunately, spoiler alert, I slacked off on my studies and did not make the progress that I had hoped I would.  I did eventually sit for the IINS exam but failed by a matter of just under 50 points.  Close, but no cigar.

    I sat idle for two or three months and brooded over my failure.  It had broken a streak of seven successful exam attempts in a row and I was miffed.  If only I had gotten three, maybe four more questions correct…

    Eventually I got over myself.  We had Cisco learning credits due to expire at work so I invested them heavily into the new exams.  I decided that I was going to make my goal of getting the CCNP Security certification come true, and I would do it prior to my year-end review – which is in October of this year.

    I selected the SISE 300-715 exam to begin with rather than the SCOR exam.  The SISE is one of several specialty exams for the new CCNP Security certification, and the updated version of the SISAS exam I was planning to take originally.  I chose this specialty specifically because I use Cisco ISE daily at work and I thought it would be a cake walk.

    What I learned, however, is that Cisco ISE has a lot more to offer than what we use it for, and I quickly began to feel like I was in over my head.

    Score Results

    First of all, I’ll admit that I’m not necessarily proud of the score or my individual topic results, but since the Cisco Press OCG book doesn’t release until October I’m not going to look a gift horse in the mouth on this one.

    There were several topics (like Web Auth and Guest Services) which were completely alien to me on a first pass over the material.

    My score breakdown by topic:

    • Architecture and Deployment – 67%
    • Policy Enforcement – 60%
    • WebAuth and Guest Services – 44%
    • Profiler – 86%
    • BYOD – 67%
    • Endpoint Compliance – 100%
    • Network Access Device Administration – 67%

    Study Materials and Cost

    For preparation, I used the following resources:

    CCNP Security SISAS 300-208 Official Cert Guide (Cisco Press) – Cost:  $105.23
    I messed up on this one by purchasing the book as a standalone item from Amazon back in 2019, which didn’t give me access to the practice test.  I ended up buying the e-book and practice test bundle separately in 2020.  If you absolutely, positively, have to take the SISE exam prior to October 2020, then this is for you.  Otherwise…wait for the revised edition to come out.

    CPLL-SISE-V3 Implementing and Configuring Cisco Identity Services Engine (Cisco Learning Library) – Cost:  $500
    I’ve listed the retail cost here, but since I used Cisco learning credits, this resource ended up being free to me.  I’d recommend it if you can afford it – or have learning credits available for use.  It makes a good companion to the printed materials and includes practice questions which aren’t carbon copies of those found in the OCG practice test.

    CCNP Security Cisco Identity Services Engine SISE 300-715 Complete Video Course (Pearson LiveLessons) – Cost:  $399.99  $129.89
    Cisco Press was running a discount on this video series for the new exams when I purchased it, so your mileage may vary.  I try to use as many different materials sources as I can, as having the same topic explained from multiple viewpoints can often help me assimilate that knowledge better myself.  For the cost I was happy with this course – although, since I only purchased it about 30 days before my exam, I did not end up making it all the way through the course.

    Network-Node.com – Cost:  Free
    Katherine McNamara is a Cisco engineer who holds multiple CCIEs and maintains a blog at network-node.com.  She has documented step-by-step Cisco ISE configuration steps for multiple ISE versions which helped explain technical material in a way that the Cisco Learning Library and Pearson LiveLessons videos just didn’t capture as well, and made perfect write-ups to follow along with if you’re labbing.

    LabMinutes.com – Cost:  Free
    This website contains a whole suite of free videos on multiple Cisco subjects, one of which is Cisco ISE – multiple versions of it at that.  There is an option to pay for downloads but you can very easily just stream the videos you’d like on demand from their website as well.  Unfortunately, this is another resource I only found out about only shortly before my exam was scheduled, so I didn’t get to use it for its full value.  If you’re just beginning your studies for the SISE exam definitely look this one up.

    Exam Fee – Cost:  $300
    I would be remiss if I didn’t include this cost.  Fairly standard as far as Cisco exams are considered.

    In Retrospect…

    I feel like the lack of a good practice test really didn’t help me much on this exam.  I did have the SISAS practice test from Cisco Press, but there are numerous differences between the SISAS and the SISE exams – namely, the SISAS is based on ISE v1.2 and SISE is based on ISE v2.4.

    There were also practice test questions included with the Cisco Learning Library Course, but I don’t feel like their difficulty was anywhere near what I encountered on the real exam.  The conceptual questions, sure, but not the specific configuration-based questions.

    Another opportunity for improvement on my part would have been labbing the principles I’m not familiar with.  I did download a trial version VM of ISE from Cisco but I had issues with the VM and had to reinstall it several times.  I never got as far as configuring profiles, guest access, or webauth portals as I intended to do, and ultimately ran out of time.  I feel like this lack of hands-on experience with configurations I have never performed is largely what contributed to my poor exam results.

    What’s Next?

    Now that I’ve passed the SISE exam – by the skin of my teeth – the only thing left to do is take on the SCOR exam.  In this case, luckily the SCOR book from Cisco Press is already available for purchase, so I shouldn’t have to try and reverse engineer the exam topics based on five year old material like I did with SISE.  There also seems like there’s a lot of carry-over in material from the IINS exam that I failed in February, which should hopefully make things easier for me before October.

    Here’s to hoping, anyway…

  • Cisco ISE 2.x: MAC Authentication Bypass (MAB)

    MAC Authentication Bypass (MAB) is a method of network access authorization used for endpoints that cannot or are not configured to use 802.1x authentication.  MAB uses the hardware address (MAC address) of the device connecting to the network to authenticate onto the network.

    This hardware-based authentication happens when a device connects to a Network Access Device (NAD) either wired or wirelessly – i.e., a switch, wireless access point, or VPN concentrator.  In this article I will be assuming that the NAD being used is a switch.

    Packets that are sent before MAB occurs and packets that are used to learn the MAC address are dropped by the switch.  Almost any packet can be used for MAB, but there are specific types of packets that cannot be used.  These include LLDP, spanning tree, and DTP packets.

    Once the switch learns the MAC address of the device attempting to connect to the network, the switch builds a RADIUS Access-Request packet using the MAC address of the device as the User Name and Calling-Station-ID.

    ISE then uses the MAC address from this RADIUS Access-Request packet to query its endpoint identity database for a match.  If a match is found, ISE returns an Access-Accept authorization to the switch and the device is allowed onto the network with a specific VLAN ID tag as configured by the ISE endpoint identity profile.

    If there is no matching endpoint identity in ISE, then the device is authentication session is put into an Unauth state and packets from that device are dropped by the NAD.

    Prerequisites

    In order for MAB to function, the switch must be configured to use the ISE server(s) for RADIUS authentications.  This configuration is outside of the scope of this article, and it is assumed that this configuration has already taken place.

    If issues are discovered with all MAB authentication on a specific switch, it may be best to troubleshoot the RADIUS configuration before troubleshooting MAB.

    MAB Host Mode Options

    There are four host mode options which can be used by MAB:

    Single-Host Mode:  MAB configured in single-host mode will allow only a single device to be allowed onto the network at a time.  If multiple devices are detected on the switchport, the switch will put the switchport into an err-disabled state.

    Multidomain Authentication Host Mode:  This host mode was created specifically for IP telephony.  Multidomain authentication allows one device to connect to each of the two switchport domains – one device can connect to the DATA domain, and one device can connect to the VOICE domain.

    Multi-Authentication Host Mode:  Multiple hosts are individually authenticated onto the network.  This host mode is used when there are multiple devices connecting to a single shared switchport through a hub or bridge such as an unmanaged switch.  Authorized devices are allowed onto the network as normal; packets from unauthorized devices are dropped and the switchport remains in the connected state.  This allows each device to be granted a specific VLAN ID according to its endpoint identity profile configured in ISE.

    Multihost Mode:  The first device to the network will be submitted to ISE for authentication.  If that device is authenticated, then the switchport will allow multiple other devices to access the network without requiring separate authentication of each device.  All connected devices will share the VLAN ID of the authenticated device.

    Typical Interface Configuration

    The standard interface configuration for deployments is as follows:

    mab
    authorization order dot1x mab
    authorization host-mode multi-auth
    authorization port-control auto

    Broken down, each of these commands accomplish the following:

    mab:  This command enables MAB on the interface.

    authorization order mab:  Establishes the order of authentication types to use.  Because MAB is typically used as a failover from 802.1x authentication, it is listed second.

    authorization host-mode multi-auth:  Specifies that MAB should use the multi-authentication host mode which allows multiple devices to authenticate onto the network each with its own VLAN ID.

    authentication port-control auto:  Turns on authentication for the switchport.

    Troubleshooting MAB

    Verify MAB status of an interface from the command line:

    show interface status | include [xyz]:  Confirm that the interface shows as connected.

    show interface status err-disabled:  If the interface shows err-disabled, this command will display the reason the interface is disabled.  This could be caused by issues such as single-host mode MAB with multiple devices connected or bpduguard.

    show run interface [xyz]:  View the interface configuration to ensure that the MAB commands are in place and complete.

    show mac address-table interface [xyz]:  Verify that the switchport has learned a MAC address for the device.  Note:  if the connected device has an Unauth session, you may not see a MAC address with this command.

    show authentication sessions interface [xyz]:  View the current authorization table for an interface.  This will display all MAC address learned by the interface as well as an Auth/Unauth status for each.

    show device tracking database interface [xyz]:  This command (specific to newer IOS versions) will display the MAC address and IP address of a connected device if device tracking is configured on the interface.  Some connection issues can be caused by a mismatch between a device with a static IP configured for a specific VLAN that does not match with the ISE endpoint identity profile.  This can also verify for VLANs with DHCP if the device has been unable to negotiate an IP address with its DHCP server by showing an APIPA address (i.e., 169.254.x.x).

    show ip device-tracking interface [xyz]:  Same command as above, but used for older IOS versions typically found on chassis-based switches.